Large scale Calorimeter


According to the heat release rate, calorie is divided into several types. The most common calorimeters include a cone calorimeter which is used to measure 10x10cm object and the furniture calorimeters which is used to evaluate the burning of 1 to 3 megawatts of the furniture (corner fire test). In order to ensure the safety of fire performance, depending on its purpose and the scale and fire performance rating of buildings and large complexes (including locomotives, vehicles, warehouses and configurations), these fire performance should have been achieved through the use of raw materials, building, the solid model performs extensive fire performance tests to verify that this test will reduce fire life and property damage. In other words, it is recommended to use a double cone calorimeter (raw material) - room angle detector / single combustion project / ISO13784-1 (micro model) - large cone calorimeter (solid) test to determine the fire safety performance classification criteria , and according to the combustion risk, the purpose and the equipment within the building specifications, which can control a wide range of fire safety performance test.

Large calorimeter heat release rate test device is used for testing and analysis the ignition characteristics, heat release rate, mass loss rate, effective heat and gas analysis of large objects or structures placed in the open space combustion process. Combine the direct physical combustion to simulate the occurrence of fire, and then analyze the collected flue gas data to understand the combustion characteristics of various experimental bodies; I t can also study the best way to eliminate fire to reduce the safety of life and property caused by fire in the test.

10MW large-scale calorimeter equipment is currently not yet developed international standards. The current design and assembly based on the main reference ISO5660-1 and ISO9705 design principles. The system covers fire safety systems, smoke extraction systems and flue gas treatment systems, sample gas sampling systems and gas analysis systems, ignition systems, software control systems.

Standards

ISO 9705, 1993 Fire tests; full-scale room test for surface products

IEC 60332-3 Tests on electric and optical fibre cables under fire conditions

EN 45545 Fire protection of railway vehicles - Part 2: Requirement for fire behaviours of materials and components

EN 50399 Common test methods for cables under fire conditions

Systems

Combustion systems, ignition circuit systems, control systems, exhaust systems, gas sampling and pretreatment systems, gas analysis systems.

Features
The filter is installed on the air flow diagram in order to remove moisture and dust;
Each filter can be exchanged with the differential sensor;
The adjustable calibrator can control the pressure of each sample gas supplied to the gas analysis frame;
Installed with a humidity measuring instrument and sensors to measure the humidity of the test space;
The gas sampling pipeline minimum 40PSI pressure can send the sample gas to about 50m of the analytical instrument;
When the test is according to oxygen consumption to test the heat release rate, anti-blocking two-way pipeline can be used to test the air flow. This is the reason why the heat flow will have so many solid and liquid, including soot, tar and other particles;
The use of Teflon anti-corrosion hose, sampling gas pipeline and instrumentation can minimize the degree of chemical deterioration of the sampled gas after corrosion or heating;
In order to protect the condensation, install with a heating tube to maintain the sampling pipe outside the temperature;
Flange test station is consisted with a two-way probe, sampling probe and smoke density test system, each compound is made of anti-corrosion materials;
Heat flow meter and water cooling system can measure the actual fire source to release the heat radiation;
As a test method for all test items, heptane is often used, but the calibrated burner will also be used alone. In particular, when using an oxygen consumption test method, the calibration burner will be used to test the net burn calories.


Contact Now Add To Basket





Order Information
Location SHANGHAI
Quantity Available 200
Minimum Order 1 Unit/Units
Price for Minimum Order 1 USD
FOB price 1.00 USD Unit/Units
Sample Available Yes
Price for Sample
Sample Shipping Cost
Sample Delivery Time
Payment Method
Payment & Price Terms
Delivery Lead Time
Quality/Safety Certifications

 

Sell Reviews for

 
  Product delivering
 
  Service
 
  Contact
 
  Product quality
 
  Trust Company
   


Review
Tags / Keywords

Tags separated by commas
Security code




[Related Categories: Measurement & Analysis Instruments ]
[Related Keywords: Large scale Calorimeter ]
Contact Information
Mrs. anna chan
(Marketing)
Company: Qinsunlab
Address: NO.258 Banting Rd., Songjiang District, China, shanghai, ??, China
Zip/Postal: 201615
Telephone: 86-21-64200566
Fax: 86-21-64200566

ICQ number: Registration required to view contact details.
MSN number: Registration required to view contact details.
Skype number: Registration required to view contact details.

View Reviews and Comments

Add Reviews - Comments (Signin required.)



See More Great Item(s) from This Seller!
Circular Locus Pilling Tester

Circular Locus Pilling Tester

Testing Standards: GB/T 4802.1, JIG 040-1990 Product Information: The Circular Locus Pilling Tester is used for determining the pilling and fuzzing Digital Auto Burst Strength Tester

Digital Auto Burst Strength Tester

Standards: ASTM D3786, ERT 80-4-20, GB/T 7742.1, BS EN ISO 13938-1, BS 3424-6-B, ISO 3303-B, ISO 2758, ISO 3303.2, ISO 3689, JIS L1018/L1093, IWS TM170   Air Permeability Tester

Air Permeability Tester

Air Permeability Tester   Testing Standards: BS 5636, JIS L1096-A, DIN 53887, ASTM D737, ASTM D3574, EN ISO 9237, GB/T 5453, EDANA 140.2, TAPPI T251 Schopper Abrasion Tester

Schopper Abrasion Tester

Testing Standards: DIN 53863, part 2 <Abrasion test methods for textile fabrics, rotary abrasion test>, GME Standard 60345, GMW Standard 3283, VW/Audi Zentral-Norm PV 3908   Seam Fatigue Tester

Seam Fatigue Tester

Seam Fatigue Tester Testing Standards Toyota TSL5101G Section 3.7,GMW 3405,Nissan M-0154,Ford Motor Co. BN 106-02,TSL5100G Section 4.22 Oxygen Index Test Apparatus

Oxygen Index Test Apparatus

 (Limiting) Oxygen Index Test Apparatus   Testing Standards:  ISO 4589-2, ASTM D2863, GB/T 2406,& Hexapod Tumbler Tester

Hexapod Tumbler Tester

Applications: The Hexapod Tumbler Tester is a popular apparatus used in the evaluation of the appearance retention of carpets. Standards of Hexapod Tumbler Test ICI Mace Snag Tester

ICI Mace Snag Tester

ICI Mace Snag Tester Testing Standards: ASTM D3939, GB/T 11047 Applications: ICI Mace Snag Tester is designed for rapidl Gas Fume Chamber

Gas Fume Chamber

Gas fume chamber is designed to test the color fastness of fabric exposed to nitrogen oxide produced by gas combustion. The tester Includes test chamber, combustion chamber, control chamber, observation door, con Zipper Testing Machine of Reciprocating Pull

Zipper Testing Machine of Reciprocating Pull

Testing Standards: QB/T 2171/2172/2173, BS 3084, AS 2332, NF G91-005, JIS S3015, DIN 3419-1, SATRA TM50 Applications: The Zipper Testing Machine& Electronic Twist Tester

Electronic Twist Tester

Electric Twist Tester   Standards: ASTM D1422/1423,BS 2085,DIN 53832,ISO 2061,IWTO 25-70,GB/T 2543.1-2001/2543.2-2001   Textile Grease Extraction Apparatus

Textile Grease Extraction Apparatus

Rapid Grease Extraction Apparatus Testing Standards of Rapid Grease Extraction Apparatus:Edana method ERT 155 Applications: Precision Fiber Microtome

Precision Fiber Microtome

Precision Fiber Microtome   Testing Standards:   ASTM D2130, BS 2043, DIN 53811, ISO 137, IWSTM 24, IWTO 8-6   Snap Button Tester

Snap Button Tester

Testing Standards: ASTM D7142-2/F963, CFR 1500, EN 71 PART 1, GB 6675, ISO 8124, M&S P115A Applications: Snap Tester is used to evaluate the Carpet Flammability Tester

Carpet Flammability Tester

Standards: BS 4790, ISO 6925, BS 6307 Applications: The Flammability Tester is used to test the effects of a small source of ignition on floor coverings. Water Proof Tester

Water Proof Tester

Standards: AATCC35, BS EN ISO 22958, GB/T 23321 Applications: Water Proof Tester is designed to determine the penetration resistance of fabrics or composites a AATCC Viewing Board

AATCC Viewing Board

Standards: American Association of Textile Chemists and Colorist (AATCC) approved test methods 88B/88C/124/128/143/178. Product Information: 1. Utilises a Yarn Length Measurement Meter

Yarn Length Measurement Meter

Yarn Length Measurement Meter Standards: FZ/T 70001-2003,FZ/T 71004-2003 Scope: Used for measuring the cycle Digital Sock Stretch Tester

Digital Sock Stretch Tester

Digital socks stretching instrument used for the determination of the value of performance testing on extending straight pantyhose, stockings, athletic, swimsuit, knitted pants and laterally extending value, also the RCA Tape Abrasion Test Machine

RCA Tape Abrasion Test Machine

RCA Tape abrasion test machine Tape abrasion test machine make wear test of various surface coating consumption test with mobile phone, PDA, MP3, CD and laptop, the load 275g, 175g.55g. Scroll Seam Fatigue Tester

Seam Fatigue Tester

Testing Standards Toyota TSL5101G Section 3.7,GMW 3405,Nissan M-0154,Ford Motor Co. BN 106-02,TSL5100G Section 4.22 Applications: The seam fatigu Oxygen Index Test Apparatus

Oxygen Index Test Apparatus

Testing Standards:  ISO 4589-2, ASTM D2863, GB/T 2406, GB/T 5454   Applications: This Oxygen Index T ICI Mace Snag Tester

ICI Mace Snag Tester

ICI Mace Snag Tester Testing Standards: ASTM D3939, GB/T 11047 Applications: ICI Mace Snag Tester is designed for r Gas Fume Chamber

Gas Fume Chamber

Gas fume chamber is designed to test the color fastness of fabric exposed to nitrogen oxide produced by gas combustion. The tester Includes test chamber, combustion chamber, control chamber, observation door, con Zipper Testing Machine of Reciprocating Pull

Zipper Testing Machine of Reciprocating Pull

Testing Standards: QB/T 2171/2172/2173, BS 3084, AS 2332, NF G91-005, JIS S3015, DIN 3419-1, SATRA TM50 Applications: The Zipper Testing Machine& Chrysler Flex Fold Tester

Chrysler Flex Fold Tester

Standards: Chrysler LP-463LB-9-01, Chrysler LP-463KB-13-01, Chrysler LP-463KB-10-01, IFAI J1531, Commercial Standard CS-273-65? Applications: The Electronic Twist Tester

Electronic Twist Tester

Standards: ASTM D1422/1423,BS 2085,DIN 53832,ISO 2061,IWTO 25-70,GB/T 2543.1-2001/2543.2-2001   Applications: The Electric Textile Grease Extraction Apparatus

Textile Grease Extraction Apparatus

Testing Standards of Rapid Grease Extraction Apparatus:Edana method ERT 155 Applications: Rapid Grease Extraction Apparatus is designed to determine t Carpet Flammability Tester

Carpet Flammability Tester

Standards: BS 4790, ISO 6925, BS 6307 Applications: The Flammability Tester is used to test the effects of a small source of ignition on floor coverings. Water Proof Tester

Water Proof Tester

Standards: AATCC35, BS EN ISO 22958, GB/T 23321 Applications: Water Proof Tester is designed to determine the penetration resistance of fabrics or composites a AATCC Viewing Board

AATCC Viewing Board

Standards: American Association of Textile Chemists and Colorist (AATCC) approved test methods 88B/88C/124/128/143/178. Product Information: 1. Utilises a Surface Flammability Tester

Surface Flammability Tester

Standards: 1. GB/T 8745-2001《textile Combustion performance fabric surface burning time measurement》 2. ISO 10047:1993《textile fabric surface burning time measurement》 Programmable Temperature and Humidity Chamber

Programmable Temperature and Humidity Chamber

Introduction  · This device can be used to measure high temperature, low temperature, thermal-cold cycling, constant temperature and humidity, rapid temperature change, and alt Liquid Penetration Resistance Tester

Liquid Penetration Resistance Tester

Introduction  The test principle of liquid penetration resistance tester is  as follow: place the sample on the tester, add the test suspension liquid and begin the test under prescri Air Conditioning Filter Filtration Performance Tester

Air Conditioning Filter Filtration Performance Tester

Instruction  The new air conditioning filter filtration performance tester uses positive pressure supply mode with high efficiency particle size spectrometer to quickly test the initial sa Hexapod Tumbler test instrument

Hexapod Tumbler test instrument

Introduction Hexapod tumbler tester, also known as carpet appearance assessment tester, is designed to determine the appearance maintenance ability of carpet. The tester is equipped with a cyli Aging Tester

Aging Tester

Introduction  The device may be specifically used to make the aging test on rubber, plastic and some other kinds of insulating materials. Its function is different from other aging stove b Hexapod Tumbler test machine

Hexapod Tumbler test machine

Introduction  The steel ball or the hexagonal feet randomly roll in the rotating drum, which is covered with carpet textile samples. Observe the appearance of change according to the stand Tracking index tester

Tracking index tester

Introduction The electric tracking index test is performed on a surface of a solid insulating material by applying a voltage to a platinum electrode of a predetermined size (2 mm x 5 mm) and dr Filter Dust Holding Capacity Test Bench

Filter Dust Holding Capacity Test Bench

Introduction  The filter dust holding capacity test bench is suitable for testing H10-U17 grade filter dust holding capacity test. According to the relevant standards, sampling aero Filter Material Comprehensive Performance Test Bench

Filter Material Comprehensive Performance Test Bench

Introduction  · The filter material comprehensive performance test bench is designed and manufacturing from experience the process of exploration and experiment, and with refer Auto Filter Test Device

Auto Filter Test Device

Introduction  • The auto filter test device is a highly targeted field test device. It has features that simple operation, easy to use. Users only need to adjust the inverter air flow Medical Testiles Air Flow Resistance Tester

Medical Testiles Air Flow Resistance Tester

Introduction  The textile airflow resistance tester is used to determine the anti-penetration properties of ordinary fabrics and medical protective masks to airflow at a constant flow rate Waterproof testing machine

Waterproof testing machine

Introduction  The machine according to IEC 60529 IP code protection class production. From IP X 1 ~ IP X 9K combination or according to customer product features grade classification produ Standard Salt Spray Test Machine

Standard Salt Spray Test Machine

Introduction Salt water spray test device: This device is used to test the surface treatment of various materials. The so-called treatments include coating, electroplating, films of organic and Dust Filter Efficiency Test System

Dust Filter Efficiency Test System

Dust filter efficiency test system compares the different pulse clean filter characteristics according to VDI / DIN 3926, ASTM D6830-02, ISO 11057, GB / T 6719, GB12625 and other standards. At the same time through th Bedding Flammability Tester

Bedding Flammability Tester

 Bedding Flammability tester is mainly used to test the combustion performance of mattress and upholstered bed. It’s suitable for bedspreads, pillows, quilts, bed sheets and other materials of indoor u Vertical Flammability Tester

Vertical Flammability Tester

Introduction  Vertical Flammability Chamber for measuring the vertical flame spread for children’ sleepwear, fabrics, other textile materials or resilient filling materials used in u Large Flame Flammability Tester

Large Flame Flammability Tester

Introduction   The Flame Flammability Tester is developed according to the NFPA 701 Method 2 and can be used for single or multi-layer fabrics. It’s used to determine the comb Large Straight Shear Apparatus

Large Straight Shear Apparatus

Large straight shear instrument is the ideal instrument for measuring the shear capacity of soil and other raw materials (up to 20mm in size). In a mixed sample, it can measure 300 mm2 of sample. The verti Building Materials Combustibility Test Chamber

Building Materials Combustibility Test Chamber

Building materials fire resistance test is a very important and professional test in safety engineering . The national standard, GB/T8626-2007, specifies the conditions under which b Large scale Calorimeter

Large scale Calorimeter

According to the heat release rate, calorie is divided into several types. The most common calorimeters include a cone calorimeter which is used to measure 10x10cm object and the furniture calorimeters which is used t Electric Wire and Cable Horizontal Vertical Combustion Tester

Electric Wire and Cable Horizontal Vertical Combustion Tester

Introduction: Wire and cable horizontal vertical combustion tester is  designed and manufactured according to UL1581. The tester is used to carry out 1060 vertical combustion and FT1 te Hollow glass dew test instrument

Hollow glass dew test instrument

Standard:   GB/ t11944-2012 "hollow glass" about dew point measurement section. Application:   It is used to Hollow glass dew tester

Hollow glass dew tester

Standard:   GB/ t11944-2012 "hollow glass" about dew point measurement section. Application:   It is used to Limiting Oxygen Index Chamber

Limiting Oxygen Index Chamber

The Limiting Oxygen Index (LOI) fire test is perhaps the most economical and precise quality control test for combustible materials. Its ease of use together with high levels of precision has made this technique a pri Average Particle Size Analyzer

Average Particle Size Analyzer

The Average Particle Size Analyzer has a simple, fast and reliable technique for measuring average particle size. This measurement can not be easily achieved by any other technique. Combined with the innovation of aut Floor Material Burning Performance Tester

Floor Material Burning Performance Tester

The tester is used to tester a variety of flooring materials, such as: textile carpets, cork, wood, rubber and plastic flooring and floor spray materials. The results can reflect the combustion properties of the floor Planar Analysis System

Planar Analysis System

The system is used to test the performance of the filter medium   Feature  · Customization · On-line particle counter ·  Weight Analysis Average Fiber Diameter Analyzer

Average Fiber Diameter Analyzer

The Average Fiber Diameter Analyzer has a simple, fast and reliable technique for measuring average particle size. This measurement can not be easily achieved by any other technique. Combined with the innovation of au Thermal Contact Resistance Testing Apparatus

Thermal Contact Resistance Testing Apparatus

Thermal contact resisting testing device is designed with the adoption of advance technology for testing the thermal contact resistance of welder’s gloves which are used for protecting hands and wrists in the op
Scroll